[Avila] USB Host controller interrupt config

[Tim Harvey]

Can any of you guys using an Avila with the ISP1562BE USB host controller tell me how to configure the interrupts for it?

# lspci
00:05.0 USB Controller: Philips Semiconductors: Unknown device 1561 (rev 11)
00:05.1 USB Controller: Philips Semiconductors: Unknown device 1561 (rev 11)
00:05.2 USB Controller: Philips Semiconductors: Unknown device 1562 (rev 11)
# modprobe usbcore
usbcore: registered new driver usbfs
usbcore: registered new driver hub
# modprobe ohci-hcd
PCI: enabling device 0000:00:05.0 (0140 -> 0142)
ohci_hcd 0000:00:05.0: Found HC with no IRQ.  Check BIOS/PCI 0000:00:05.0
setup!ohci_hcd 0000:00:05.0: init 0000:00:05.0 fail, -19
PCI: enabling device 0000:00:05.1 (0140 -> 0142)
ohci_hcd 0000:00:05.1: Found HC with no IRQ.  Check BIOS/PCI 0000:00:05.1
setup!ohci_hcd 0000:00:05.1: init 0000:00:05.1 fail, -19
# modprobe ehci-hcd
PCI: enabling device 0000:00:05.2 (0140 -> 0142)
ehci_hcd 0000:00:05.2: Found HC with no IRQ.  Check BIOS/PCI 0000:00:05.2
setup!ehci_hcd 0000:00:05.2: init 0000:00:05.2 fail, -19
                       ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Thanks,

Tim