[Avila] USB Host controller interrupt config

[Dave G]

Tim,

I believe the way I got around this is NOT the correct way to do it...but it 
worked for the time being until I can look around a bit more. I increased 
IXDP425_PCI_MAX_DEV in:

include/asm-arm/arch-ixp4xx/ixdp425.h

-#define IXDP425_PCI_MAX_DEV    4
+#define IXDP425_PCI_MAX_DEV    6

Thanks!

-Dave

----- Original Message ----- 
From: "Tim Harvey" <tim_harvey at yahoo.com>
To: <avila at lists.unixstudios.net>
Sent: Monday, July 03, 2006 4:45 PM
Subject: [Avila] USB Host controller interrupt config
Subject: [Avila] > Can any of you guys using an Avila with the ISP1562BE USB host controller 
> tell me how to configure the interrupts for it?
>
> # lspci
> 00:05.0 USB Controller: Philips Semiconductors: Unknown device 1561 (rev 
> 11)
> 00:05.1 USB Controller: Philips Semiconductors: Unknown device 1561 (rev 
> 11)
> 00:05.2 USB Controller: Philips Semiconductors: Unknown device 1562 (rev 
> 11)
> # modprobe usbcore
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> # modprobe ohci-hcd
> PCI: enabling device 0000:00:05.0 (0140 -> 0142)
> ohci_hcd 0000:00:05.0: Found HC with no IRQ.  Check BIOS/PCI 0000:00:05.0
> setup!ohci_hcd 0000:00:05.0: init 0000:00:05.0 fail, -19
> PCI: enabling device 0000:00:05.1 (0140 -> 0142)
> ohci_hcd 0000:00:05.1: Found HC with no IRQ.  Check BIOS/PCI 0000:00:05.1
> setup!ohci_hcd 0000:00:05.1: init 0000:00:05.1 fail, -19
> # modprobe ehci-hcd
> PCI: enabling device 0000:00:05.2 (0140 -> 0142)
> ehci_hcd 0000:00:05.2: Found HC with no IRQ.  Check BIOS/PCI 0000:00:05.2
> setup!ehci_hcd 0000:00:05.2: init 0000:00:05.2 fail, -19
>                       ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> Thanks,
>
> Tim
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
> For additional commands, e-mail: avila-help at lists.unixstudios.net
>
>