[Avila] booting Avila GW234x issues

[John Carter]

The only pre-built working images that I'm aware of come with the  
Gateworks 0.6 BSP which is part of the development kit that can be  
ordered from Gateworks at www.gateworks.com .  They use the snapgear  
environment rather than debian however.

On Jul 21, 2006, at 3:17 AM, Chandrashekhar wrote:

>
> Hi,
>
> I am using "Gateworks Avila GW234X (IXP42X 533MHz) BE"  board. I am  
> not
> able to boot this target with the kernel image built from debian  
> (kernel
> version: 2.6.16) using arm-linux toolchain.
>
> Greatly appreciated if any body give some pointer on  booting  
> "Gateworks
> Avila GW234X (IXP42X 533MHz) BE"  board from scratch and where to get
> prebuilt working images (using debian linux distribution and arm-linux
> toolchain) from net.
>
>
> Thanks in advance
> -Chandrashekhar
>
>
>
>
> The information contained in, or attached to, this e-mail, contains  
> confidential information and is intended solely for the use of the  
> individual or entity to whom they are addressed and is subject to  
> legal privilege. If you have received this e-mail in error you  
> should notify the sender immediately by reply e-mail, delete the  
> message from your system and notify your system manager. Please do  
> not copy it for any purpose, or disclose its contents to any other  
> person. The views or opinions presented in this e-mail are solely  
> those of the author and do not necessarily represent those of the  
> company. The recipient should check this e-mail and any attachments  
> for the presence of viruses. The company accepts no liability for  
> any damage caused, directly or indirectly, by any virus transmitted  
> in this email.
>
> www.aztecsoft.com
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
> For additional commands, e-mail: avila-help at lists.unixstudios.net
>