[Avila] turn off redboot send/receive on com2

[devel]

HA! Man that seems easy enough. We had the same problem when a device was 
locking up redboot at boot time. We have solved this problem with our power 
supply not turning on that device at boot time, only when a later script 
told it to turn on. I may still go in and give this a try however. Thanks 
Tim.

Travis

----- Original Message ----- 
From: "Tim Harvey" <tim_harvey at yahoo.com>
To: "Avila" <avila at lists.unixstudios.net>
Sent: Monday, May 01, 2006 11:42 AM
Subject: Re: [Avila] turn off redboot send/receive on com2
Subject: [Avila] > Travis,
>
> I'm catching up on old postings and didn't see you ever get an answer to 
> this. Sorry this is a month old.
>
> Yes you can disable COM2 if needed by rebuilding redboot (I had to do this 
> as a device I had on COM2 would hang redboot at the boot script).
>
> look for CYGNUM_HAL_ARM_IXP425_SERIAL_CHANNELS in 
> hal\arm\xscale\exp425\current\cdl\hal_arm_xscale_ixp425.cdl and set the 
> value to 'calculated 1' to only use COM1 and not COM2
>
> Tim
>
> devel <devel at oberonwireless.com> wrote: Does anyone know if its possible 
> with redboot to turn off any sending and receiving on COM2. My first guess 
> is this would need to be done in the source and then re-compiled, which is 
> fine, but I'm not seeing anything in the source code to say otherwise. Any 
> thoughts? Thanks.
>
>
> Travis
>