[Avila] GW2348-4 Gateworks support - Urgent

[Gianluca Mando']

We have bought 4 GW2348-4 boards from Gateworks but all of them din't boot (with
the fabric configuration: boot from flash configured by Gateworks). The console
output:

Trying NPE-B...success. Using NPE-B with PHY 0.
Ethernet eth0: MAC address 00:d0:12:02:27:92
IP: 192.168.3.3/255.255.255.0, Gateway: 192.168.3.1
Default server: 192.168.3.1

RedBoot(tm) bootstrap and debug environment [ROM]
Gateworks certified release, version 2.02 - built 05:22:19, Mar  3 2006

Platform: Gateworks Avila GW234X (IXP42X 533MHz) BE
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Copyright (C) 2004, 2005 Gateworks Corporation

RAM: 0x00000000-0x04000000, [0x000298b0-0x03fc1000] available
FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
== Executing boot script in 2.500 seconds - enter ^C to abort
RedBoot> fis load zimage
RedBoot> fis load ramdisk
RedBoot> exec -c "console=ttyS0,115200 root=/dev/ram0 initrd=0x00800000,8M
mem=64M at 0x00000000" 0x01600000
Using base address 0x00800000 and length 0x00310150

[here the system stops]

It is the first time I work with this type of board, until now we have used the
GW2345 one.
Anyway we have re-flashed redboot but the result didn't change.

Thanks!

Gianluca

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.