[Avila] GW2348-4 Gateworks support - Urgent

[Dave G]

Gianluca,

Which serial port are you connected to?

-Dave

>
> We have bought 4 GW2348-4 boards from Gateworks but all of them din't boot 
> (with
> the fabric configuration: boot from flash configured by Gateworks). The 
> console
> output:
>
> Trying NPE-B...success. Using NPE-B with PHY 0.
> Ethernet eth0: MAC address 00:d0:12:02:27:92
> IP: 192.168.3.3/255.255.255.0, Gateway: 192.168.3.1
> Default server: 192.168.3.1
>
> RedBoot(tm) bootstrap and debug environment [ROM]
> Gateworks certified release, version 2.02 - built 05:22:19, Mar  3 2006
>
> Platform: Gateworks Avila GW234X (IXP42X 533MHz) BE
> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
> Copyright (C) 2004, 2005 Gateworks Corporation
>
> RAM: 0x00000000-0x04000000, [0x000298b0-0x03fc1000] available
> FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
> == Executing boot script in 2.500 seconds - enter ^C to abort
> RedBoot> fis load zimage
> RedBoot> fis load ramdisk
> RedBoot> exec -c "console=ttyS0,115200 root=/dev/ram0 initrd=0x00800000,8M
> mem=64M at 0x00000000" 0x01600000
> Using base address 0x00800000 and length 0x00310150
>
> [here the system stops]
>
>
> It is the first time I work with this type of board, until now we have 
> used the
> GW2345 one.
> Anyway we have re-flashed redboot but the result didn't change.
>
> Thanks!
>
> Gianluca
>
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
> For additional commands, e-mail: avila-help at lists.unixstudios.net
>
>