[Avila] GW2348-4 Gateworks support - Urgent

[Dave G]

Do you have a DB9 on that board? If so connect your serial cable to it and
reset your board.

-Dave

> Dave,
>
> I'm using serial port 2 (J6) by using Gateworks dev kit ribbon cable.
>
> Gianluca
>
> Scrive Dave G <daveg at unixstudios.net>:
>
>>
>> Gianluca,
>>
>> Which serial port are you connected to?
>>
>>
>> -Dave
>>
>>
>>
>>
>> >
>> > We have bought 4 GW2348-4 boards from Gateworks but all of them din't 
>> > boot
>> > (with
>> > the fabric configuration: boot from flash configured by Gateworks). The
>> > console
>> > output:
>> >
>> > Trying NPE-B...success. Using NPE-B with PHY 0.
>> > Ethernet eth0: MAC address 00:d0:12:02:27:92
>> > IP: 192.168.3.3/255.255.255.0, Gateway: 192.168.3.1
>> > Default server: 192.168.3.1
>> >
>> > RedBoot(tm) bootstrap and debug environment [ROM]
>> > Gateworks certified release, version 2.02 - built 05:22:19, Mar  3 2006
>> >
>> > Platform: Gateworks Avila GW234X (IXP42X 533MHz) BE
>> > Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
>> > Copyright (C) 2004, 2005 Gateworks Corporation
>> >
>> > RAM: 0x00000000-0x04000000, [0x000298b0-0x03fc1000] available
>> > FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
>> > == Executing boot script in 2.500 seconds - enter ^C to abort
>> > RedBoot> fis load zimage
>> > RedBoot> fis load ramdisk
>> > RedBoot> exec -c "console=ttyS0,115200 root=/dev/ram0 
>> > initrd=0x00800000,8M
>> > mem=64M at 0x00000000" 0x01600000
>> > Using base address 0x00800000 and length 0x00310150
>> >
>> > [here the system stops]
>> >
>> >
>> > It is the first time I work with this type of board, until now we have
>> > used the
>> > GW2345 one.
>> > Anyway we have re-flashed redboot but the result didn't change.
>> >
>> > Thanks!
>> >
>> > Gianluca
>> >
>> >
>> >
>> > ----------------------------------------------------------------
>> > This message was sent using IMP, the Internet Messaging Program.
>> >
>> >
>> > ---------------------------------------------------------------------
>> > To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
>> > For additional commands, e-mail: avila-help at lists.unixstudios.net
>> >
>> >
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
>> For additional commands, e-mail: avila-help at lists.unixstudios.net
>>
>>
>
>
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
> For additional commands, e-mail: avila-help at lists.unixstudios.net
>
>