[Avila] GW2348-4 Gateworks support - Urgent

[Gianluca Mando']

Thanks, yes on 2348-4 the serial to be used with ribbon cable is ttyS1.

Gianluca

Scrive "Burns, Darrell" <dburns1 at ibahn.com>:

> Or change your console=ttyS0 to console=ttyS1
>
> - Darrell
>
> 	-----Original Message-----
> 	From: Dave G [mailto:daveg at unixstudios.net]
> 	Sent: Tue 5/16/2006 1:36 PM
> 	To: Avila
> 	Cc:
> 	Subject: Re: [Avila] GW2348-4 Gateworks support - Urgent
>
>
>
>
> 	Do you have a DB9 on that board? If so connect your serial cable to it and
> 	reset your board.
>
>
> 	-Dave
>
>
>
>
> 	> Dave,
> 	>
> 	> I'm using serial port 2 (J6) by using Gateworks dev kit ribbon cable.
> 	>
> 	> Gianluca
> 	>
> 	> Scrive Dave G <daveg at unixstudios.net>:
> 	>
> 	>>
> 	>> Gianluca,
> 	>>
> 	>> Which serial port are you connected to?
> 	>>
> 	>>
> 	>> -Dave
> 	>>
> 	>>
> 	>>
> 	>>
> 	>> >
> 	>> > We have bought 4 GW2348-4 boards from Gateworks but all of them din't
> 	>> > boot
> 	>> > (with
> 	>> > the fabric configuration: boot from flash configured by Gateworks). The
> 	>> > console
> 	>> > output:
> 	>> >
> 	>> > Trying NPE-B...success. Using NPE-B with PHY 0.
> 	>> > Ethernet eth0: MAC address 00:d0:12:02:27:92
> 	>> > IP: 192.168.3.3/255.255.255.0, Gateway: 192.168.3.1
> 	>> > Default server: 192.168.3.1
> 	>> >
> 	>> > RedBoot(tm) bootstrap and debug environment [ROM]
> 	>> > Gateworks certified release, version 2.02 - built 05:22:19, Mar  3 2006
> 	>> >
> 	>> > Platform: Gateworks Avila GW234X (IXP42X 533MHz) BE
> 	>> > Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
> 	>> > Copyright (C) 2004, 2005 Gateworks Corporation
> 	>> >
> 	>> > RAM: 0x00000000-0x04000000, [0x000298b0-0x03fc1000] available
> 	>> > FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
> 	>> > == Executing boot script in 2.500 seconds - enter ^C to abort
> 	>> > RedBoot> fis load zimage
> 	>> > RedBoot> fis load ramdisk
> 	>> > RedBoot> exec -c "console=ttyS0,115200 root=/dev/ram0
> 	>> > initrd=0x00800000,8M
> 	>> > mem=64M at 0x00000000" 0x01600000
> 	>> > Using base address 0x00800000 and length 0x00310150
> 	>> >
> 	>> > [here the system stops]
> 	>> >
> 	>> >
> 	>> > It is the first time I work with this type of board, until now we have
> 	>> > used the
> 	>> > GW2345 one.
> 	>> > Anyway we have re-flashed redboot but the result didn't change.
> 	>> >
> 	>> > Thanks!
> 	>> >
> 	>> > Gianluca
> 	>> >
> 	>> >
> 	>> >
> 	>> > ----------------------------------------------------------------
> 	>> > This message was sent using IMP, the Internet Messaging Program.
> 	>> >
> 	>> >
> 	>> > ---------------------------------------------------------------------
> 	>> > To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
> 	>> > For additional commands, e-mail: avila-help at lists.unixstudios.net
> 	>> >
> 	>> >
> 	>>
> 	>>
> 	>> ---------------------------------------------------------------------
> 	>> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
> 	>> For additional commands, e-mail: avila-help at lists.unixstudios.net
> 	>>
> 	>>
> 	>
> 	>
> 	>
> 	>
> 	> ----------------------------------------------------------------
> 	> This message was sent using IMP, the Internet Messaging Program.
> 	>
> 	>
> 	> ---------------------------------------------------------------------
> 	> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
> 	> For additional commands, e-mail: avila-help at lists.unixstudios.net
> 	>
> 	>
>
>
> 	---------------------------------------------------------------------
> 	To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
> 	For additional commands, e-mail: avila-help at lists.unixstudios.net
>
>
>
>

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.