[Avila] Voltage and Temperature Monitoring

[Tim Harvey]

Joel,=0A=0ALooks like you haven't enabled all the kernel requirements.  For=
 2.6.x you need 'Hardware Monitoring Support' CONFIG_HWMON and CONFIG_SENSO=
RS_AD7418.  If you configure those as modules make sure you load the module=
s.  This provides the sysfs files that the userland apps 'showvolt' and 'sh=
owtemp' are trying to read.=0A=0ATim=0A=0A----- Original Message ----=0AFro=
m: Joel Lindsay <joel at waveteq.com>=0ATo: Avila <avila at lists.unixstudios.net=
>=0ASent: Wednesday, November 29, 2006 9:37:36 PM=0ASubject: [Avila] Voltag=
e and Temperature Monitoring=0A=0AHi,=0A=0AI am trying to use the avila vol=
tage and temp monitoring.  I have enabled=0Athem in the snapgear dist but w=
hen I run them I get error of =0A=0A$ showvolt=0AError: could not open /sys=
/class/hwmon/hwmon0/device/volt (2)=0A=0A# showtemp=0AError: could not open=
 /sys/class/hwmon/hwmon0/device/temp_input (2)=0A=0ACan anyone help.  I was=
 trying to add these to the dev.txt file but I don't=0Aknow the major and m=
inor numbers.  Any help getting these running is=0Aappreciated.=0A=0AJL=0A=
=0A=0A---------------------------------------------------------------------=
=0ATo unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net=0AFor ad=
ditional commands, e-mail: avila-help at lists.unixstudios.net=0A=0A=0A=0A