[Avila] fatal ethernet error on gw2348-4

[devel]

David,

I have seen this error from time to time as well. Unfortunately I don't know 
the cause or cure for it. I have been able to ignore it for now. It doesn't 
seem to prevent me from sending or receiving packets from what I can tell. 
But then again, I'm not on top of them all the time when this error occurs.

It would be nice to get to the bottom of it, just for peace of mind.

Travis

----- Original Message ----- 
From: "David Acker" <dacker at roinet.com>
To: "Avila" <avila at lists.unixstudios.net>
Sent: Monday, October 09, 2006 10:20 AM
Subject: [Avila] fatal ethernet error on gw2348-4
Subject: [Avila] > Hello folks,
> We are running the .06 development kit on our gw2348-4 board.  If we run 
> it long enough with even small amounts of ethernet traffic we eventually 
> get the following error:
>
> [fatal] ixEthRxFrameProcess: Failed to replenish with filtered frame on 
> port 0
>
> After this error the port usually does not receive at all but can send. 
> For example, when I ping an ethernet client that has ethereal on, I can 
> see the ARP requests, and I can see the client send the ARP response, but 
> the board's arp tables do not show ever getting the response.  The port 
> stays in this state through unplug/replug of the cable.  Sometimes it 
> stays in this state through a reboot command.  It always clears up on a 
> full power cycle.  The other ethernet port will work when one port is in 
> this state.
>
> Does anyone know what causes this error and how to fix it?
>
>
> -Ack
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
> For additional commands, e-mail: avila-help at lists.unixstudios.net
>
>