[Avila] fatal ethernet error on gw2348-4

[Dave G]

Ack,

Is the affected port part of a bridge group? Do you have any netfilter rules 
in place either using bridge nf or not?

-Dave

> Hello folks,
> We are running the .06 development kit on our gw2348-4 board.  If we run 
> it long enough with even small amounts of ethernet traffic we eventually 
> get the following error:
>
> [fatal] ixEthRxFrameProcess: Failed to replenish with filtered frame on 
> port 0
>
> After this error the port usually does not receive at all but can send. 
> For example, when I ping an ethernet client that has ethereal on, I can 
> see the ARP requests, and I can see the client send the ARP response, but 
> the board's arp tables do not show ever getting the response.  The port 
> stays in this state through unplug/replug of the cable.  Sometimes it 
> stays in this state through a reboot command.  It always clears up on a 
> full power cycle.  The other ethernet port will work when one port is in 
> this state.
>
> Does anyone know what causes this error and how to fix it?
>
>
> -Ack
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
> For additional commands, e-mail: avila-help at lists.unixstudios.net
>
>