No subject
Mon Jun 25 13:53:28 EDT 2007
> 10/02/2006
>
>
>
> =
---------------------------------------------------------------------
> To unsubscribe, e-mail: =
avila-unsubscribe at lists.unixstudios.net
> For additional commands, e-mail: =
avila-help at lists.unixstudios.net
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
> For additional commands, e-mail: avila-help at lists.unixstudios.net
>
>
------------------------------
Date: Thu, 6 Apr 2006 08:01:27 -0700 (PDT)
To: "Avila" <avila at lists.unixstudios.net>
From: gw at lunstad.com
Subject: RE: [Avila] redboot prompt
Message-ID: <56564.24.118.159.225.1144335687.squirrel at webmail.lunstad.com>
HI Mihir,
I've had problems in the past sending the Ctrl-C character from a terminal
that was set up with Flow Control on. Try making sure that flow control is
off on your terminal (and that your other terminal settings are correct of
course) before powering/reseting the board.
Andrew
> Hi Kunaal,
>
> This problem occurs during boot process, so I cannot get to Redboot
> prompt, hence I am unable to get any info.
>
> Thanks
>
> -----Original Message-----
> From: Kunaal [mailto:kunaal.boal at gmail.com]
> Sent: Wednesday, April 05, 2006 7:34 PM
> To: Avila
> Subject: Re: [Avila] redboot prompt
>
> Could you send your output from
> stty -a
> That could possibly provide some insight.
>
> On 4/5/06, Boal, Mihir D (US SSA) <mihir.boal at baesystems.com> wrote:
>>
>> Hello,
>>
>> I am having same problem on one of our Avila GW2342 card. I cannot get
>> to RedBoot prompt. I tried linux minicom as well as windows hyperterm.
>>
>> Was this issue resolved ?
>>
>> Thank you
>> Mihir
>>
>> -----Original Message-----
>> From: pduchein [mailto:avila at nomotech.com]
>> Sent: Mon 02/13/2006 08:07 AM
>> To: Avila
>> Cc:
>> Subject: Re: [Avila] redboot prompt
>>
>>
>>
>> Hello,
>> i tried it
>> but i've got the same. CTRL+C do nothing and boot procedure
>> continue.
>> Thanks
>>
>>
>> loft a icrit :
>>
>> >pduchein wrote:
>> >
>> >
>> >
>> >>Hello,
>> >>I try on com1 and com2 and via telnet under 192.168.3.2 port
>> 9000
>> >>impossible to enter under prompt mode !
>> >>
>> >>Who can help me ?
>> >>
>> >>
>> >>
>> >Try:
>> >telnet 192.168.3.2 9000
>> >
>> >from a box that's connected from the Ethernet.
>> >
>> >Tom
>> >
>> >
>> >
>> >
>> >>Thanks
>> >>
>> >>
>> >>
>> >>sanjay at newpacket.com a icrit :
>> >>
>> >>
>> >>
>> >>>Try hitting CTRL+C right when you see the "Trying NPE-B..."
>> message.
>> >>>I had the similar problem, but hitting CTRL+C early seems to
>> work fine
>> >>>for me.
>> >>>
>> >>>..sanjay
>> >>>
>> >>>
>> >>>
>> >>>-------- Original Message --------
>> >>>Subject: [Avila] redboot prompt
>> >>>From: pduchein <avila at nomotech.com>
>> >>>Date: Mon, February 06, 2006 9:34 am
>> >>>To: avila at lists.unixstudios.net
>> >>>
>> >>>Hi,
>> >>>
>> >>>It's a very small problem
>> >>>i do something wrong to enter under prompt mode
>> >>>
>> >>>I recompile redboot (with source code on the CDROM redboot
>> 2.01
>> )
>> >>>i flash the card, everything is all right
>> >>>and now it recognize IDE controller on CF card
>> >>>
>> >>>/*+No devices on IDE controller 0
>> >>>
>> >>>Trying NPE-B...success. Using NPE-B with PHY 0.
>> >>>Ethernet eth0: MAC address 00:d0:12:02:13:21
>> >>>IP: 192.168.3.2/255.255.255.0, Gateway: 0.0.0.0
>> >>>Default server: 192.168.3.1
>> >>>
>> >>>RedBoot(tm) bootstrap and debug environment [ROM]
>> >>>Red Hat certified release, version 2.01 - built 16:35:27,
>> Feb 6 2006
>> >>>
>> >>>Platform: Gateworks Avila Family (XScale) BE
>> >>>Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
>> >>>
>> >>>RAM: 0x00000000-0x10000000, [0x00029880-0x03fc1000] available
>> >>>FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000
>> bytes
>> each.*
>> >>>*== Executing boot script in 1.000 seconds - enter ^C to
>> abort
>> >>>
>> >>>*/at this point i do CTRL+C but it continue boot script and
>> doesn't
>> >>>enter in prompt mode/*
>> >>>*
>> >>>*RedBoot> fis load ramdisk
>> >>>RedBoot> fis load zimage
>> >>>...
>> >>>
>> >>>*/How can i enter in prompt mode?
>> >>>Thanks
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>
>> >>
>> >>
>> >
>> >
>>
>> >---------------------------------------------------------------------
>> >To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
>> >For additional commands, e-mail:
>> avila-help at lists.unixstudios.net
>> >
>> >
>> >
>> >
>>
>>
>>
>> --
>> No virus found in this outgoing message.
>> Checked by AVG Free Edition.
>> Version: 7.1.375 / Virus Database: 267.15.6/257 - Release Date:
>> 10/02/2006
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
>> For additional commands, e-mail:
>> avila-help at lists.unixstudios.net
>>
>>
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
>> For additional commands, e-mail: avila-help at lists.unixstudios.net
>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
> For additional commands, e-mail: avila-help at lists.unixstudios.net
>
>
More information about the Avila
mailing list