[Avila] [gw2347] confusing J4 pin array

[Ron Eisworth]

Looks like the attachment didn't go through, here is a text version.

Also note that the serial port signals are at 3.3V logic levels (not
buffered) and not at RS232 levels on this connector. 

Ron

J4 = GW2347, J19 = GW2348			
HSS/GPIO/SERIAL		38-PIN 0.05INCH SOCKET
------------------------------------------------	

PIN	SIGNAL		SIGNAL	PIN
1	HSS1TXDATA		HSS1RXDATA	2
3	HSS1TXFSC		HSS1RXFSC	4
5	HSS1TXCLK		HSS1RXCLK	6
7	GND			GND	8
9	HSS2TXDATA		HSS2RXDATA	10
11	HSS2TXFSC		HSS2RXFSC	12
13	HSS2TXCLK		HSS2RXCLK	14
15	GND			GND	16
17	SER1TXD (3.3V)	SER1RXD (3.3V)	18
19	SER2TXD (3.3V)	SER2RXD (3.3V)	20
21	GND			GND	22
23	GPIO_0		GPIO_1	24
25	GPIO_2		GPIO_3	26
27	GPIO_4		GPIO_5	28
29	SCL			SDA	30
31	3.3V			GND	32
33	3.3V			GND	34
35	SER1RTS (3.3V)	SER2RTS (3.3V)	36
37	SER1CTS (3.3V)	SER2CTS (3.3V)	38 

-----------------------------------------------

-----Original Message-----
From: Ron Eisworth [mailto:reisworth at gateworks.com] 
Sent: Friday, June 22, 2007 8:23 AM
To: 'Avila'
Subject: RE: [Avila] [gw2347] confusing J4 pin array
Subject: [Avila] Sangsu,
See attached PDF for pinout. 

Regards,

Ron 

Ron Eisworth
Gateworks Corporation
3026 S. Higuera, San Luis Obispo, CA 93401
Ph: 805-781-2000 Fax: 805-781-2001
Email: reisworth at gateworks.com
Web: www.gateworks.com

-----Original Message-----
From: Sangsu Baek [mailto:sangsu at emctech.net]
Sent: Thursday, June 21, 2007 9:43 PM
To: avila at lists.unixstudios.net
Subject: [Avila] [gw2347] confusing J4 pin array
Subject: [Avila] hi
J4[HSS/GPIO] has a lot of pins, but not documented(only pin 1 marked).
I want to know the location of J4 ping 23 (for GPIO 0).
thanks

2007.6.22
Sangsu Baek