[Avila] how to add ethernet support to redboot image

[Tim Harvey]

I feel like a broken record here....

Why are you not using the redboot source from the Gateworks Avila BSP?  Its all
there for you!

There is no link to download the BSP as far as I know, you need to contact
Gateworks to buy/obtain the CDRom.

Tim

--- Bhanu Prakash Adhikari <bhanua at aztecsoft.com> wrote:

> 
> 
> I succeed redboot image loading into Avila board. Thanks to David Acker
> for his time and patience.
> 
> I find npe Ethernet drivers are missing on the image. May I know how can
> I add the drivers to the image?
> 
> Also the redboot shows the following errors -
> 
> 1.	Flash configuration checksum error
> 2.	Not able to load from CF.
> 
> Setup -
> 
> 	Avila Board
> 	IXDP425
> 	Debian Linux 2.6.18
> 	ECOS snapshot (1 week old)
> 
> How can I make redboot complete?
> 
> Thanks and rgds,
> Bhanu Prakash A
> 
> 
> REDBOOT LOG MESSAGES
> ---------------------
> 
> reset
> 
> ... Resetting.
> 
> +**Warning** FLASH configuration checksum error or invalid key
> 
> Use 'fconfig -i' to [re]initialize database
> 
> No network interfaces found
> 
> 
> 
> RedBoot(tm) bootstrap and debug environment [ROM]
> 
> Non-certified release, version UNKNOWN - built 02:13:17, Mar  2 2007
> 
> 
> 
> Platform: IXDP425 Development Platform (XScale) BE
> 
> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
> 
> Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited
> 
> 
> 
> RAM: 0x00000000-0x10000000, [0x00017440-0x0ffd1000] available
> 
> FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
> 
> RedBoot>
> 
> RedBoot>
> 
> RedBoot> fconfig
> 
> Run script at boot: false
> 
> Use BOOTP for network configuration: true
> 
> Default server IP address: 192.168.157.198
> 
> Console baud rate: 115200
> 
> GDB connection port: 9000
> 
> Force console for special debug messages: false
> 
> Network debug at boot time: false
> 
> Update RedBoot non-volatile configuration - continue (y/n)? n
> 
> RedBoot> fconfig
> 
> Run script at boot: false
> 
> Use BOOTP for network configuration: true
> 
> Default server IP address: 192.168.157.198                            
>                 
> 
> Console baud rate: 115200
> 
> GDB connection port: 9000
> 
> Force console for special debug messages: false
> 
> Network debug at boot time: false
> 
> RedBoot> load hda1:/images/minifs -r -b 0x000800000                    
>     800000 -m disk
> 
> Invalid 'mode': disk.  Valid modes are: http tftp xmodem ymodem
> 
> RedBoot> ip_address                                  
> 
> RedBoot>
> 
> RedBoot>
> 
> 
> 
> 
> 
> The information contained in, or attached to, this e-mail, contains
> confidential information and is intended solely for the use of the individual
> or entity to whom they are addressed and is subject to legal privilege. If
> you have received this e-mail in error you should notify the sender
> immediately by reply e-mail, delete the message from your system and notify
> your system manager. Please do not copy it for any purpose, or disclose its
> contents to any other person. The views or opinions presented in this e-mail
> are solely those of the author and do not necessarily represent those of the
> company. The recipient should check this e-mail and any attachments for the
> presence of viruses. The company accepts no liability for any damage caused,
> directly or indirectly, by any virus transmitted in this email.
> 
> www.aztecsoft.com
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
> For additional commands, e-mail: avila-help at lists.unixstudios.net
> 
>