[Avila] "flash.exe gw-128.bin v" gives error with default image (gw-128.bin)

[Ron Eisworth]

Bhanu,
The RB-128.bin file is for boards with 128M SDRAM. For standard =
GW2348-4's
you will want to use the RB-64.bin (64M SDRAM) or for the =
GW2348-2/GW2347
you would use RB-32.bin (32M SDRAM).

Regards,

Ron=20

Ron Eisworth
Gateworks Corporation
3026 S. Higuera, San Luis Obispo, CA 93401
Ph: 805-781-2000 Fax: 805-781-2001
Email: reisworth at gateworks.com
Web: www.gateworks.com

-----Original Message-----
From: Bhanu Prakash Adhikari [mailto:bhanua at aztecsoft.com]=20
Sent: Thursday, March 22, 2007 7:10 AM
To: Avila
Subject: [Avila] "flash.exe gw-128.bin v" gives error with default image
(gw-128.bin)

I'm programming flash using GW16012 JTAG programmer for Avila GW2348-4
board.

I tried to program flash with the default image (gw-128.bin) supplied =
with
Dev kit by Gateworks.

I'm using Qemu to program the flash.

"flash.exe gw-128.bin p" succeeds but "flash.exe gw-128.bin v" shows =A0
       =A0
       "Verify Error: Address: <some address> Actual: FFFF Expected: =
<some
hex>"

Why am I getting this error? What's was wrong in my setup? Am I missing =
some
thing?

Also board doesn't boot at all. I mean no output on hyperterminal.

Thanks in advance,
Bhanu Prakash A

The information contained in, or attached to, this e-mail, contains
confidential information and is intended solely for the use of the
individual or entity to whom they are addressed and is subject to legal
privilege. If you have received this e-mail in error you should notify =
the
sender immediately by reply e-mail, delete the message from your system =
and
notify your system manager. Please do not copy it for any purpose, or
disclose its contents to any other person. The views or opinions =
presented
in this e-mail are solely those of the author and do not necessarily
represent those of the company. The recipient should check this e-mail =
and
any attachments for the presence of viruses. The company accepts no
liability for any damage caused, directly or indirectly, by any virus
transmitted in this email.

www.aztecsoft.com

---------------------------------------------------------------------
To unsubscribe, e-mail: avila-unsubscribe at lists.unixstudios.net
For additional commands, e-mail: avila-help at lists.unixstudios.net