[Avila] Not able to load/write RedBoot image on Avila board using JTAG (from GW).

[Bhanu Prakash Adhikari]

Setup -=0D

	GW2348 Avila board - 64 MB
	JTAG=0D
	Parallel Port
	MS-DOS
	flash.exe version 1.1
	RedBoot 2.02 (from GW)

I tried to load custom built RedBoot 2.02 for 64MB Avila (GW2348) board
using JTAG (from GW). I'm using MS-DOS to burn the inbuilt flash.=0D

	"flash.exe redboot-64.bin pv" gives no error.=0D

(My flash.exe version doesn't support "o" option)

After programming and verifying is done, I powered-off the board and
unplugged JTAG and powered-on. To my surprise I see no input on
Hyperterminal.=0D

Am I missing something crucial? Can some one help me with workable
redboot sample image, so that I can understand better on JTAG usage?

Thanks in advance,
Bhanu Prakash A

******************** PLEASE IGNORE THE FOLLOWING DISCLAIMER/NOTICE; IT
IS ATTACHED TO ALL THE MAILS BY DEFAULT *****************

The information contained in, or attached to, this e-mail, contains=
 confidential information and is intended solely for the use of the=
 individual or entity to whom they are addressed and is subject to legal=
 privilege. If you have received this e-mail in error you should notify the=
 sender immediately by reply e-mail, delete the message from your system=
 and notify your system manager. Please do not copy it for any purpose, or=
 disclose its contents to any other person. The views or opinions presented=
 in this e-mail are solely those of the author and do not necessarily=
 represent those of the company. The recipient should check this e-mail and=
 any attachments for the presence of viruses. The company accepts no=
 liability for any damage caused, directly or indirectly, by any virus=
 transmitted in this email.

www.aztecsoft.com