[Avila] GW2201 8 port Serial board linux drivers?

[Chris Lang]

Mark,
What does "dmesg" say? The dev entries are usually static entries and
are not updated with a new device. Check "dmesg", if they are detected
here, you can add dev entries for each device accordingly.

Thanks,
-- 
Chris Lang
Gateworks Corporation
3026 S. Higuera, San Luis Obispo, CA 93401
Ph: 805-781-2000 Fax: 805-781-2001
Email: clang at gateworks.com
Web: www.gateworks.com

On Thu, 2007-11-15 at 21:38 -0500, Mark Kelly wrote:
> Chris,
> 
> I've enabled the following in .config:
> 
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_NR_UARTS=10
> CONFIG_SERIAL_8250_RUNTIME_UARTS=10
> 
> recompiled and I'm still not detecting the board.  lspci clears shows
> the board but I'm not see any new /dev/ttySx's.  I only see the 2
> defined at ttyS0 and ttyS1.
> 
> 
> 
> On Wed, 2007-11-14 at 14:09 -0800, Chris Lang wrote:
> > Mark,
> > 
> > The standard "8250/16550" drivers will work for this card, you must
> > enable "8250/16550 PCI device support" and increase "Maximum number of
> > 8250/16550 serial ports" and "Number of 8250/16550 serial ports to
> > register at runtime".
> > 
> > Thanks,
> > 
> 
> _______________________________________________
> Avila mailing list
> Avila at lists.gateworks.com
> http://lists.gateworks.com/cgi-bin/mailman/listinfo/avila