[Avila] Always checksum error after flashing new redboot image

[José Luis Ferrer]

Hi,

After flashing a new redboot (2.04) to a GW-2348-4 board, when booting, 
the redboot always prompts a message about error in eeprom checksum, 
with the execution of econfig tool in order to write the adequate values 
into the eeprom (GPIO0/5-14 and model). However, writing new values does 
not solve the problem, because the same error message appears always. 
Also, when executing Linux image, the message “EEPROM checksum error, 
loading Default values” appears.
The same redboot image has been flashed to another 2 identical boards 
without errors and the eeprom tool seems to work properly since memory 
can be read and written from the redboot console.
In addition, flashing the old version from redboot (2.02) works fine and 
images from Linux and rootfs are executed and loaded successfully.
Any suggestions in what can cause the problem?

Regards,

José Luis