[Avila] BSP 0.7.1 Redboot Problem on non-B1 stepping

[Ahmet Basagalar]

Chris,

Yes it works with redboot that comes with BSP 0.6.

Thanks,
Ahmet
----- Original Message ----- 
From: "Chris Lang" <clang at gateworks.com>
To: "Ahmet Basagalar" <ahmet at thebluezone.com>
Cc: "avila" <avila at lists.gateworks.com>
Sent: Friday, April 25, 2008 6:08 PM
Subject: Re: [Avila] BSP 0.7.1 Redboot Problem on non-B1 stepping


> Ahmet,
>
> Does this board work with the 0.6.1 Redboot or 0.6 Redboot?
>
> Thanks,
>
> -- 
> Chris Lang
> Gateworks Corporation
> 3026 S. Higuera, San Luis Obispo, CA 93401
> Ph: 805-781-2000 Fax: 805-781-2001
> Email: clang at gateworks.com
> Web: www.gateworks.com
>
> On Fri, 2008-04-25 at 18:06 -0600, Ahmet Basagalar wrote:
>> Hi,
>>
>> I am trying to use the redboot provided in BSP 0.7.1 on older version of
>> GW2348-4 (non B1 stepping) and it keeps constantly rebooting. I only see
>> this on the serial port:
>>
>> Trying NPE-B...+No devices on IDE controller 0
>>
>> Trying NPE-B...+No devices on IDE controller 0
>>
>> Trying NPE-B...+No devices on IDE controller 0
>>
>> Trying NPE-B...+No devices on IDE controller 0
>>
>> Trying NPE-B...+No devices on IDE controller 0
>>
>> Trying NPE-B...+No devices on IDE controller 0
>>
>> Trying NPE-B...+No devices on IDE controller 0
>>
>> This BSP is supposed to support both old and new versions, so I do not 
>> know
>> where I am doing wrong. Help please...
>>
>> Thanks,
>> Ahmet
>>
>>
>>
>> _______________________________________________
>> Avila mailing list
>> Avila at lists.gateworks.com
>> http://lists.gateworks.com/cgi-bin/mailman/listinfo/avila
>
>
>