[Avila] watchdog on avila (GW-2348)

[Tim Harvey]

The 'problem' is that the watchdog will trip and reset your board.  If
its not occurring to you then your using a version of the software that
tickles the watchdog while its programming.

Tim

----- Original Message ----
From: Al Caliskan <acaliskan at gmail.com>
To: Chris Lang <chris at ccbw.net>
Cc: avila at lists.gateworks.com
Sent: Friday, May 9, 2008 9:56:28 AM
Subject: Re: [Avila] watchdog on avila (GW-2348)

Chris,

Chris Lang wrote:
> There is also issues with programming the boards through jtag with the
> watchdog resistor loaded, this has been resolved with the DOS version of our
> utility, but no other jtag programmers/debuggers currently work with the
> resistor loaded.
>  
I am able to reliably JTAG program an Avila board with the R11 resistor 
installed. I programmed and verified the flash memory contents of the 
same board 10 times, and every time it worked. I am using a GW16012 Rev 
D JTAG programmer in Linux.

Could you in more detail describe the problem that will occur when an 
Avila with R11 installed is JTAG programmed. Does the problem apply to 
all Avila hardware revisions? How can I replicate the problem in Linux 
using the GW16012 Rev D programmer?

Thank you,

- Al


_______________________________________________
Avila mailing list
Avila at lists.gateworks.com
http://lists.gateworks.com/cgi-bin/mailman/listinfo/avila