[Avila] avila gw 2348-4 hangs after reboot

[David Acker]

Sebastian G wrote:
> Hello!
> 
>     From time to time there is a problem with starting of a device (gw
> 2348-4) after reboot (reboot was caused by watchdog). On a serial
> console we can see messages like below:
> 
> +No devices on IDE controller 0
> DB: (FeatureScan) NpeDl did not provide the image ID for NPE port 0
> DB: (FeatureScan) NpeDl did not provide the image ID for NPE port 1
> [warning] ixEthAccQMgrQueuesConfig: no queues configured, bailing out
> [warning] ixEthAccInit: queue config failed
> Error initialising Ethernet access driver!
> No network interfaces found
> 
> RedBoot(tm) bootstrap and debug environment [ROM]
> Gateworks certified release, version 2.02 - built 05:22:19, Mar  3 2006
> 
> Platform: Gateworks Avila GW234X (XScale) BE
> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
> Copyright (C) 2004, 2005 Gateworks Corporation
> 
> RAM: 0x00000000-0x04000000, [0x000298b0-0x03fc1000] available
> FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
> == Executing boot script in 2.500 seconds - enter ^C to abort
> 
> 
> After that device just hungs and needs to be restarted manually.
> Does anyone had this problem before? This problem occurs only on few devices.
I have seen static cause this kind of issue.  Are you using the DS1819 
or the IXP watchdog?  The IXP watchdog does not reset everything in the 
system like the DS1819.
-ack