[Avila] avila gw 2348-4 hangs after reboot

[Sebastian G]

2008/7/24 David Acker <dacker at roinet.com>:
> Sebastian G wrote:
>>
>> Hello!
>>
>>    From time to time there is a problem with starting of a device (gw
>> 2348-4) after reboot (reboot was caused by watchdog). On a serial
>> console we can see messages like below:
>>
>> +No devices on IDE controller 0
>> DB: (FeatureScan) NpeDl did not provide the image ID for NPE port 0
>> DB: (FeatureScan) NpeDl did not provide the image ID for NPE port 1
>> [warning] ixEthAccQMgrQueuesConfig: no queues configured, bailing out
>> [warning] ixEthAccInit: queue config failed
>> Error initialising Ethernet access driver!
>> No network interfaces found
>>
>> RedBoot(tm) bootstrap and debug environment [ROM]
>> Gateworks certified release, version 2.02 - built 05:22:19, Mar  3 2006
>>
>> Platform: Gateworks Avila GW234X (XScale) BE
>> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
>> Copyright (C) 2004, 2005 Gateworks Corporation
>>
>> RAM: 0x00000000-0x04000000, [0x000298b0-0x03fc1000] available
>> FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
>> == Executing boot script in 2.500 seconds - enter ^C to abort
>>
>>
>> After that device just hungs and needs to be restarted manually.
>> Does anyone had this problem before? This problem occurs only on few
>> devices.
>
> I have seen static cause this kind of issue.  Are you using the DS1819 or
> the IXP watchdog?  The IXP watchdog does not reset everything in the system
> like the DS1819.
> -ack
>

I'm using the ixp watchdog and I'm aware of that it does not reset
everything. In that case, is it just another issue related to this
watchdog?

Sebastian